Rob Allen Speargun Spear/Shaft

The best quality spear out there! Others say it.......Rob Allen does it

Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa. 
Tri-cut tips spears (available in 6.6mm, 7mm & 7.5mm) ensure excellent penetration with 270 degree polished wishbone notches and polished line holes ensure minimum wear.

Each spear is mechanically de-coiled from the heat treated bulk roll and hand straightened and quality checked before machining.

Single Flopper:

6.6mm diameter spears available for the following guns
- 50cm, 70cm, 75cm, 90cm, 100cm, 110cm and 120cm guns

Designed for good speed and excellent penetration, 7mm shafts are a good all round choice for larger fish. Best with a single double 14mm, double 16mm or single 20mm band depending on the length of the gun and power required.

7mm diameter spears available for the following guns
110cm, 120cm and 130cm guns

Designed to penetrate large deep bodied fish at longer range, 7.5mm shafts retain much of the kinetic energy at the edge of their range. Best with 2 x 16mm rubbers.

7.5mm diameter spears available for the following guns
130cm and 140cm guns

Double Flopper:

Rob Allen off-set double flopper 7.5mm spears are for the serious fish! don't bother with in-accurate slip tips.
There spears are proven in South Africa on 100+ kg monsters daily

Designed with two heavy duty mm pre-tuned smooth edged floppers, with great holding capability and tri-cut tip for maximum penetration. Floppers are offset and opposing, providing greater holding power - particularly effective on doggies, mackeral and wahoo, as well as all other pelagic fish. 

Engineered from ultra tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa. Rhino plated for rust prevention. 

7.5mm double flopper spears available for the following guns - 130cm & 140cm guns

Drop Barb:

Rob Allen has designed a new sliptip and have called theirs a drop barb, a great design with budget in mind. Suitable for those Kingfish that keep getting away!

This tip comes with a shaft which is 7.5mm thick, we would suggest twin 15.5mm rubbers (16mm) or a17.5mm rubber or bigger, but twin rubbers is best.

Don't bother with in-accurate slip tips anymore. These spears are proven in South Africa on 100+ kg monsters daily Designed with a large heavy duty smooth edged flopper with great holding capability and tri-cut tip for maximum penetration. Engineered from ultra-tough oil quenched carbon alloy spring steel, they are tempered to 2100Mpa. Rhino plated for rust prevention. Rob Allen spears are designed to fit all Euro gun mechanisms. 

Rob Allen Spears are designed to fit all Euro gun mechanisms.